Markov fracture models of inhomogeneous media and design of layered structures synthesized by additive technology
https://doi.org/10.29235/1561-2430-2024-60-2-106-116
Abstract
We consider the problem of studying the fracture of a composite macrolayer synthesized by additive technology on a solid substrate, to which the boundary of the lower microlayer is rigidly bonded. The materials of the microlayers are homogeneous and isotropic. The thicknesses of microlayers and the total thickness of the macrolayer are the control parameters of synthesis. The physical and mechanical characteristics of the microlayers and their combination in the macrolayer are also controlling parameters. The layer is fractured by a crack, which may appear in the top layer (or any other layer) and move toward the substrate or free surface, perpendicular to the boundaries of the microlayers. The crack can stop at the boundaries between the layers (then it is treated as a separate state) or pass through the boundaries without stopping. Based on the theory of Markov chains, the average lifetime of a stratified layer synthesized on a substrate using additive technology and the variance of the number of cycles (lifetime) characterizing the quality of the synthesized structure are calculated. On the basis of the materials available for the synthesis of the layered coating, the problems of optimal design of the composite body with maximum average resource, minimum resource dispersion, maximum specific strength for given geometric and physical-mathematical constraints on the composite parameters are solved. To find optimal solutions, dynamic programming algorithms are used, implemented on circuits (graphs) of sequential selection of a combination of layer materials according to their synergistic properties.
About the Authors
M. A. Zhuravkov
Belarusian State University
Belarus
Belarus
Michael A. Zhuravkov – Dr. Sc. (Physics and Mathematics), Professor, Head of the Department of Theoretical and Applied Mechanics
9, Bobruiskaya Str., 220030, Minsk
Yu. Zamzhitskaya-Chigareva
Belarusian State University
Belarus
Belarus
Yuliya Zamzhitskaya-Chigareva – Ph. D. (Physics and Mathematics), Senior Researcher of Research laboratory of Applied mechanics, Department of Theoretical and Applied mechanics
9, Bobruiskaya Str., 220030, Minsk
References
1. Tikhanov V. I., Mironov M. A. Markov Processes. Moscow, Sovetskoe radio Publ., 1977. 488 p. (in Russian).
2. Spitzer F. Principles of Random Walk. Princeton New Jersey, D. Van Nostrand Company, Inc., 1964. 472 p.
3. Kemeny J. G., Snell J. L. Finite Markov Chains. Springer-Verlag, 1960. 238 p.
4. Bogdanoff J. L., Kozin F. Probabilistic Models of Cumulative Damage. New York: John Wiley & Sons, 1985. 341 p.
5. Cappelli M. The evolution of multi-site small cracks under fatigue loading. PhD Thesis. Georgia Institute of Technology, 2007.
6. Garsted, L., Brincker R., Hansen L. P. (1994) The Fracture Mechanical Markov Chain Fatigue Model Compared with Empirical Data. Aalborg, Dept. of Building and Structural Engineering, Aalborg University, 1994. Available at: https://vbn.aau.dk/ws/portalfiles/portal/204441130/The_Fracture_Mechanical_Markov_Chain_Fatigue_Model_Compared_with_Empirical_Data.pdf.
7. Garsted L., Brincker R., Hansen L. P. Fracture mechanical Markov chain of crack growth model. Engineering Fracture Mechanics, 1991, vol. 38, no. 6, pp. 475–489. https://doi.org/10.1016/0013-7944(91)90097-k
8. Saveliev L. Y. Simple stochastic models of cracks. Journal of Applied and Industrial Mathematics, 2014, vol. 8, pp. 385–394. https://doi.org/10.1134/S1990478914030119
9. Saveliev L. Y. Markov model of crack dynamics of special type. Siberian Journal of Industrial Mathematics, 2018, vol. 12, pp. 145–152. https://doi.org/10.1134/s1990478918010131
10. Wagner H. M. Principles of Operations Research. Vol. 3. Englewood Cliffs, New Jersey, Prentice-Hall. Inc., 1969. 500 p.
11. Pestrikov V. M., Morozov E. M. Fracture Mechanics of Solids. St. Petersburg, Professiya Publ., 2002. 300 p. (in Russian).
12. Morozov E. M. Variation Principle in Fracture Mechanics. Doklady academii nauk SSSR [Doklady of the Academy of Sciences of USSR], 1969, vol. 184, no. 6, pp. 1308–1311 (in Russian).
13. Chigarev A. V. Stochastic and Regular Dynamics of Non-Homogeneous Media. Minsk, Tekhnoprint Publ., 2000. 426 p. (in Russian).
14. Kazakov V. A. Introduction to the Theory of Markov Processes and Some Radio Engineering Tasks. Moscow, Sovetskoe radio Publ., 1973. 231 p. (in Russian).
15. Bolotin V. V., Novichkov Yu. N. Mechanics of Multilayer Structures. Moscow, Mashinostroenie Publ., 1980. 375 p. (in Russian).
16. Cherepanov G. P., Ershov L. V. Fracture Mechanics. Moscow, Mashinostroenie Publ., 1977. 223 p. (in Russian).
17. Banichuk N. B., Kobelev V. V., Rickards R. B. Optimization of Structural Elements from Composite Materials. Moscow, Mashinostroenie Publ., 1988. 224 p. (in Russian).
Review
Views: 165
Email this article 